Home > Marine and Waterproof > Vehicle Amplifiers > 
Home > On the Road > Vehicle Amplifiers > 

Product Details
 
  • Pyle - PLAM1000 , On the Road , Vehicle Amplifiers , 1000 Watts 2 Channel Bridgeable Amplifier
  • Pyle - PLAM1000 , On the Road , Vehicle Amplifiers , 1000 Watts 2 Channel Bridgeable Amplifier
  • Pyle - PLAM1000 , On the Road , Vehicle Amplifiers , 1000 Watts 2 Channel Bridgeable Amplifier
1000 Watts 2 Channel Bridgeable Amplifier
Model PLAM1000
Brand Pyle
Category Vehicle Amplifiers
MSRP $151.99
Warranty 1 year

Details

 
  • Two Channel Bridgeable Amplification
  • Tri-way Configuration:1/2 Channels
  • 2 X 500Watts Total Output @ 4 Ohms
  • 1000 Watts Total System Output @ 4 Ohms
  • Variable Gain Control
  • MOSFET Pulse Width Modulated Power Supply
  • 2 Ohm Stereo Stable
  • Built-In Variable Subwoofer Crossover
  • High Level Low Impedance MOLEX Input Connector
  • RCA Low Level Inputs
  • Speaker Output Terminal Strip
  • Signal/Noise Ratio 90dB
  • THD Less Than 0.04%
  • Frequency Response:15Hz-30kHz
  • Overload Protection
  • Thermal Protection
  • Short Circuit Protection
  • Power On LED Indicator
  • LED Diagnostic Condition Indicator
  • Automotive Type Fuse Protection
  • Dimensions:7.28''L 9.76''W 2.26''H
  • Sold as : Unit
  • Weight :5.85 lbs.
  • Videos

    No Videos Available

    Reviews

     
      Average Rating :
      My amplifier is broken......More
      Amp has great output...More
      i have bougt my apm pyle at ealmart...More
      Very good product for the money....More
      works good sounds great good price...More



    Sign in to Add Review

     
    Buy Online
     
    Similar Products
     
    PLAM1000
    Bridgeable Connection view larger
    PLAM1000
    Academy Series Amplifiers view larger
    PLAM1000
    System Application Diagram view larger
    PLAM1000
    Smart Sound and Style
    PLAM1000
    MOSFET Power Supply view larger
    PLAM1000
    Power Connection Diagram view larger

    Versatile Hybrid Amplifiers

    The Pyle Academy Series Amplifiers will provide your audio setup with sophisticated new sound and serious power. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrow’s advanced sound technology that outperforms all other amps in its class.

    This lineup of Pyle Academy amps will educate your audience with the knowledge of true sound quality. These amps will give you that sound you’ve been looking for with crisp music reproduction in the mobile environment.

    Sound Specialization

    These high-efficiency class-D amplifiers host an impressive power output and are where form and function meet. Configurable for Bridgeable and Tri-Way applications, built-in Variable Subwoofer Crossovers, MOSFET Pulse Width Modulated Power Supply, High Level Low Impedance MOLEX Input Connector, strong frequency response rates along with plenty of more features that make the Pyle Academy Series Amplifiers smarter than the competition.

    Intelligent Design

    Safety features include power and protection LED indicators; soft turn-on/off, thermal, overload and speaker-short protection. The built-in air-induction fan cooling system acts as another line of safety keeping you and your equipment safe. Status LED Diagnostic Condition indicators show when the amplifier is powered up normally and when your system is experiencing a protection fault.

    Pump it Up

    Take advantage of the Bass EQ Boost to add massive quality sound and performance. Make adjustments to the Bass EQ settings until you achieve that extra amount of kick you’ve been waiting for.

    Intelligent Sound – Intelligent Style

    The smooth-edged and rounded design leaves a blue-pearl gloss finish on the fortified aluminum heat-sink. The stream-lined and high-tech appearance will definitely add some attention to your audio.

    Total Audio Control

    Once you are connected, customize and adjust your listening experience to your liking with the amplifier’s control center. You can personalize and fine-tune settings like:

    • High-Pass Filter – When Crossover Mode is in High-Pass Mode, this control limits the frequencies which will be distributed to the speakers Crossover Switch – Routes output of the Low Pass (LP), or the output of the High Pass (HP) filters, or ‘FULL’ to the internal power amplifier.
    • Low-Pass Filter - When Crossover Mode Selector is in Low-Pass Mode, this control limits the frequencies which will be distributed to the speakers.
    • Line Input – Accepts line level (RCA) inputs from 0.2 to 5-Volt.
    • High-in - Accepts speaker level inputs from radios that do not line level (RCA) outputs.
    • Bass EQ - Gives you manual control over Bass Boost decibel adjustments.

    *Please refer to table below for amplifier specific information and adjustment options.

    Input Connections

    Turn the volume control on the amplifier to minimum initially. Once the initial power sequence has been performed, set the volume control to roughly 80% of full power. Play some audio and slowly turn up the amplifier volume control until you hear some distortion, and then back it off for the sharpest sound setting. This amplifier has RCA connections for Low Level inputs. Low Level signal is carried through RCA cables. It is preferred to use Low Level inputs to the amplifier if the headunit is equipped with matching outputs.

    Speaker Output Connections

    Connect right and left speaker wire to corresponding speaker output terminals of the terminals. Be sure to have the positive wire from the speaker to the positive speaker terminal of the amplifier and the negative wire from the speaker must connect with the speaker terminal of the amplifier. Reversing any of these connections will result in the speaker cones moving out of phase which causes bass cancellation.

    Technical Specs

    • Two Channel Bridgeable Amplification
    • Tri-Way Configuration: 1/2 Channels
    • 2 X 500 Watts Total Output @ 4 Ohms
    • 1000 Watts Total System Output @ 4 Ohms
    • Variable Gain Control
    • MOSFET Pulse Width Modulated Power Supply
    • 2 Ohm Stereo Stable
    • Built-In Variable Subwoofer Crossover
    • High Level Low Impedance MOLEX Input Connector
    • RCA Low Level Inputs
    • Speaker Output Terminal Strip
    • Signal/Noise Ratio 90 dB
    • THD Less Than 0.04%
    • Frequency Response: 15Hz-30kHz
    • Overload Protection
    • Thermal Protection
    • Short Circuit Protection
    • Power On LED Indicator
    • LED Diagnostic Condition Indicator
    • Automotive Type Fuse Protection
    • Dimensions: 7.28''L 9.76''W 2.26''H

    More Amplifier Options from the Academy Series:

    PLAM1000
    Currently Viewing
    PLAM1200
     
    PLAM2300
     
    PLAM1600
     
    PLAM3000
     
    PLAM2001D
     
    PLAM3601D
     
    Amplifier Type 2-Channel 2-Channel 2-Channel 4-Channel 4-Channel Monoblock Monoblock
    Total Watt Output 1,000 1,200 2,300 1,600 3,000 2,000 3,600
    Peak Output Power @ 4 Ohms 500 x 2 600 x 2 1150 x 2 400 x 4 750 x 4 800 x 1 1500 x 1
    Peak Output Power @ 2 Ohms 700 W x 2 800 x 2 1300 x 2 600 x 4 1000 x 4 1600 x 1 2400 x 1
    Peak Output Power @ 1 Ohms - - - - - 2000 x 1 3600 x 1
    Input Sensitivity 0.1 ~ 1 V 0.1 ~ 1 V 0.1 ~ 1 V 0.2 ~ 5 V 0.2 ~ 5 V 0.2 ~ 6 V 0.2 ~ 6 V
    S/N Ratio >90 dB >90 dB >90 dB >90 dB >90 dB >95 dB >95 dB
    High Pass Cross Frequency 120Hz ~ 3KHz 120Hz ~ 3KHz 120Hz ~ 3KHz 120Hz ~ 3KHz 120Hz ~ 3KHz - -
    Low Pass Cross Frequency 50Hz ~ 250Hz 50Hz ~ 250Hz 50Hz ~ 250Hz 50Hz ~ 250Hz 50Hz ~ 250Hz 40Hz ~ 150Hz 40Hz ~ 150Hz
    Subsonic Filter - - - - - 15Hz ~ 55Hz 15Hz ~ 55Hz
    Bass EQ 6dB / 12dB @ 45Hz 6dB / 12dB @ 45Hz 6dB / 12dB @ 45Hz 6dB / 12dB @ 45Hz 6dB / 12dB @ 45Hz 0-12dB @ 45Hz 0-12dB @ 45Hz
    Speaker Impedance 2 ~ 16 Ω 2 ~ 16 Ω 2 ~ 16 Ω 2 ~ 16 Ω 2 ~ 16 Ω 1 ~ 8 Ω 1 ~ 8 Ω
    Fuse Size 1 x 20A 1 x 30A 1 x 40A 2 x 15A 2 x 30A 2 x 35A 4 x 25A

     

    Product Description
    The Pyle Academy series is an affordable option to provide high-power, high-quality sound to your vehicle's speakers. Academy amplifiers are sturdy with amp heatsinks and accept both low level RCA inputs as well as high-level, low-impedance MOLEX inputs. So you can rock your tunes no matter what kind of head unit you have. The PLAM1000 is a two-channel, 1000-watt bridgeable amplifier. It's equipped with variable gain control, a built-in variable subwoofer crossover, and a three-way configuration. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. Welcome to the academy - the Pyle Academy.
    Pyle - PLAM1000 , On the Road , Vehicle Amplifiers , 1000 Watts 2 Channel Bridgeable Amplifier Pyle - PLAM1000 , On the Road , Vehicle Amplifiers , 1000 Watts 2 Channel Bridgeable Amplifier Pyle - PLAM1000 , On the Road , Vehicle Amplifiers , 1000 Watts 2 Channel Bridgeable Amplifier
    Product Review
     Name : Alex 9/29/2013 3:24:56 PM
       Review : My amplifier is broken...

     Name : Bradley 7/30/2013 9:10:20 AM
       Review : Amp has great output

     Name : Angel 4/12/2013 8:31:54 PM
       Review : i have bougt my apm pyle at ealmart is good pyle

     Name : Jami 10/31/2012 4:49:04 PM
       Review : Very good product for the money.

     Name : Eric 5/18/2012 2:34:23 PM
       Review : works good sounds great good price