|
|
|
Professional High-Performance Dual Passive DI-Box - 1/4'' Instrument To Balanced & Unbalanced (1/4''/XLR) Direct Box
|
|
|
|
|
|
|
Details
|
|
Features:
Two High-Quality Direct Boxes In One Convenient Enclosure
Enables to Tap Off the Signals from Amplifiers such as Guitar or Power Amplifier
Provides the Facility for the Direct Insertion of an Audio Signal into Mixer or Recorder
1/4 Device Connector
Ultra-low Noise and Distortion
Connects All Kinds of Audio Signals like Guitars, Keyboards, etc.
Suitable for Outboard Signal Processors & High-Powered Speaker
Enables to Tap Off the Signals w/out Affecting the Original Sounds
Useful for Connecting Unbalanced Signals from Sources like Signals DJ and Sub Mixers
Provides a Clean Signal at a Low Level
Plug-in Guitar Directly into the PA System
Easy to Use Passive Electronic Device
Controls Hum and Buzz from Stage with the Ground Lift
Heavy Duty 14 Gauge Steel Construction
Bi-Directional Impedance Matching
What’s In The Box:
Premium Direct Injection Audio Box
Technical Specs:
Frequency Response: 5-35 KHz, -3dB
Noise Level: -104dBu
THD: 0.013%
Input Impedance: 50K Ohm
Max.Input Level: +8.1 dBu (9V Batt), +11.3 dBu (48V Phantom)
Instrument Input: 1/4'' Phone Jack, unbalanced
Parallel (link) Out: 1/4'' Phone Jack, unbalanced
Balanced Output: XLR Connector, balanced
Ground Lift: Switch-Able Ground Lift
Input Attenuation: Switch-Able (0db, -20db,-40db)
Construction Material: All Steel Chassis
Product Dimensions: 5.51'' x 4.72'' x 1.57'' -inchesSold as: UnitWeight: 1.26 lbs.
|
|
|
|
|
|
|
|
|
|
|
Similar Products
|
|
|
|
|
|
|
|
|
|
|
|
Pyle PDC22 is a necessity if you are looking for the higest quality of sound, with low distortion, noise, and eliminate ground loops. A DI unit, DI box, Direct Box, Direct Input, Direct Injection or simply DI is an electronic device that connects a high impedance, line level, unbalanced output signal to a low impedance mic level balanced input, usually via XLR connector. DIs are frequently used to connect an electric guitar or electric bass to a mixing console's microphone input. The DI performs level matching, balancing, and either active buffering or passive impedance bridging to minimise noise, distortion, and ground loops. DIs do not perform impedance matching. Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear.
|